'E' Range
Features
- Low density brick lining
- 1300°C firing temperature for all models
- Low kilowatt input for maximum size of chamber
- Casing finished in two-tone stove enamel incorporating air gap for low skin temperature
- Door gasket seal
- Full selection of kiln furniture and control equipment available for all models
- 1 year warranty
|
Type |
Capacity |
Firing Chamber |
External Dimensions |
Weight |
kW |
Amps |
Price |
||||
|
L ft³ |
W |
D |
H |
W |
D |
H |
kg lb. |
1 ph 3 ph |
£ Pounds Sterling |
||
|
mm in |
mm in |
mm in |
mm in |
mm in |
mm in |
||||||
| E250 |
74 2.6 |
381 15 |
381 15 |
508 20 |
660 26 |
787 31 |
1524 60 |
200 441 |
5 |
22 8 |
poa |
| E350 | 106
3.75 |
457
18 |
457
18 |
508
20 |
737
29 |
864
34 |
1524
60 |
210
463 |
7 | 30.5
10 |
poa |
| E375 | 127
4.5 |
457
18 |
457
18 |
610
24 |
737
29 |
864
34 |
1727
68 |
255
563 |
8 | 35
12 |
poa |
| E400 | 170
6 |
457
18 |
610
24 |
610
24 |
737
29 |
1016
40 |
1727
68 |
300
662 |
12 | 53
18 |
poa |
| E450 | 227
8 |
610
24 |
610
24 |
610
24 |
889
35 |
1016
40 |
1753
69 |
360
794 |
15 | 66
22 |
poa |
Product Description
With our 5-model Firebird 'E' range of front-loading kilns we aim to supply a robust & reliable kiln at a competitive price.
The price quoted is for the kiln only, you can then select controller, furniture, thermocouple type etc to build up your kiln package.
These kilns are for use at up to 1300°C, utilising a double-skinned casing construction with air-gap. This ensures that they operate with a minimum heat loss and a sensible outside casing temperature. The kiln is fully lined with low density brick including the door. The door can be specified as right or left-hand opening and is gasket sealed.
The frame design incorporates an integral floor stand. All electrical connections including the rear wall mounted thermocouple can be accessed from the rear of the kiln after removing the rear cover-plate. Heating elements are situated in the 2 sidewalls and the base. All models operate from 230VAC and are available in single phase or 3-phase + neutral versions.
All models are covered by our 1-year warranty.
When planning the installation of a kiln attention should be given to the size of the kiln room, floor strength & ventilation requirements. Space should be allowed to enable the kiln to be manoeuvred into position and to meet the minimum clearance distances. The floor must be level and strong enough to support the weight of the kiln and its workload. Adequate ventilation is essential especially in enclosed situations - forced ventilation is recommended.
Minimum clearance distances are:-Above: 750mm 30"
At sides: 150mm 6"
At rear: 450mm 18"
